Personalised Chopping Board with milled groove

Personalised Chopping Board with milled groove : Design your own

Show off your creative skills and personalise your new chopping board made from beech wood which is a durable natural material and gentle on your knives. 

Professionally Laser engraved with your personalised design!

The chopping board has a milled groove for collecting juice run off  and prevents it from spilling on to your worktop.

 Chopping Board Specifications

• Made from Beech
• Measures at  38cm x 27cm
• Laser Engraved Personalised Details
• Small Manufacturer Marking on Side

Care & Use:

• After each use, rinse with a wet sponge using hot water and a little mild dish washing liquid then towel dry.
• Never soak your board in water or place in the dishwasher.
• Do not use a steel brush or steel wool on the board’s surface.
• Do not allow moisture of any type to stand on the board for long periods of time.
• Do not let fresh, wet meats lay on the block for longer than necessary.
• Apply an even coat of vegetable Oil periodically which will help preserve the board. Dab on with a cloth and let dry
• Avoid prolonged exposure to sunlight

Please note: there is a manufacturer branding along the front edge of this chopping board, due to the different tones throughout wood some engraving may be lighter or darker. Depending on your screen there may be colour differences.

Be sure to check out our other serving board designs