Engraved Corporate Logo Serving Board
Show off your culinary skills and promote your business while displaying your serving board.
We professionally laser engrave your corporate logo into the board ensuring a hard wearing long lasting finish.
We place the logo in the bottom right corner to make sure the logo can be seen at all times!
Serving Board Specifications
- Made from Beech
- Measures at 38cm x 27cm
- Laser Engraved Logo
- Small Manufacturer Marking on Side
Care & Use:
- After each use, rinse with a wet sponge using hot water and a little mild dish washing liquid then towel dry.
- Never soak your board in water or place in the dishwasher.
- Do not use a steel brush or steel wool on the board’s surface.
- Do not allow moisture of any type to stand on the board for long periods of time.
- Do not let fresh, wet meats lay on the block for longer than necessary.
- Apply an even coat of vegetable Oil periodically which will help preserve the board. Dab on with a cloth and let dry
- Avoid prolonged exposure to sunlight
- There is a manufacturer branding along the front edge of the serving board
- Due to the different tones throughout wood some engraving may be lighter or darker.
- Depending on your screen there may be colour differences.
Be sure to check out our other serving board designs